Off the shelf products Systems and subsystems Advanced simulators Modulators and Power Electronics California Tubes Lab Corporate Information Contact Information Home Page
NEW - XCON
X-ray CONtroller
The XCON combines (1) a Trigger Amplifier, (2) a Delay Generator and (3) a Pulsed Event Timer (PET)
  
Control X-ray Sources Manually or Remotally Via Ethernet
State-of-the-Art
Timing with +/- 10ns
Fits a standard 19" rack
LAB VIEW® accessible
Compact
3-in-1 Control Unit
Works with ALL existing FXR systems
User Friendly Interface
  • Dimensions: 3.5"H x 19"W x 13"D
  • Power 100-240V, 50/60 Hz
  • System Weight: ~8.3 lbs

XCON Data Sheet (194 KB)
  • User Trigger Input Pulse: +/-2V to 200V into 50 ohms
  • Trigger Output Monitor: -10V nominal
  • Max. Current Input: -2,500V, delay in 100ns increments up to 1 sec, internal delay < 400ns, jitter +/1 10ns with 3.5ns RMS
  • Pulsed Event Timer (PET) - Start/Stop Pulse: +/-2V to 200V into 50 ohms (Protected to 250V).
  • Pulse Interval Timer: Up to 1 sec with 10ns resolution
  • Operating Systems: Win 2000 or XP
  • Control Software: Lab View (6.1 or better). Comes with control console EXE and UI source code
  • Communication: Ethernet 10/100
  • System Compatability: XCON can run everything from a 150 kV system all the way through a 2.3 MV system